Eye Candy

Back from the Gem Shows.....
It's hard to describe how happy these beads make me. I don't even want to cut into the strands. They are sooooo beautiful, I just want to leave them on my coffee table, facets glimmering, tassels cheering up the room. I'll probably be selling some strands off on modernmetals.etsy.com and using the others in my designs. If you see any you absolutly have to have let me know and I'll reserve a listing for you... As soon as I work up the courage to cut into their cute little tasseled strands.

I lucked out and scored a bunch of juicy neon colored Chalcedony. Including some amazing microfaceted natural Peruvian Blue briolettes (they are on the far left) and some great hot pink briolettes. Here’s the Chalcedony group…

Some great colors that remind me of autumn...
And here’s the eye candy…

Look at these tassels!!

Treasury AGAIN! :)

What a great week!!

Another of my items was put in a treasury! I am praying that it will make it to the front page, that would be an amazing break through for me and I'd be forever grateful!

It was my cotton candy necklace, I put a red box around it...


Thanks to MermaidTreasures, she really did a beautify job of selecting items within the same soothing color scheme.

I love the treasuries but I’ve never had any luck making one. I can’t seem to figure out how to time it so that I can get my foot in the door. Maybe one day it will finally happen. In the mean time I’ll just have to feature my favorite Etsy finds here on the blog.

I’ve been busy making tutorials to list in my supplies shop, listed the first today. It for the fun funky little pair of earrings seen below. I’m still going to have free tutorials up on the blog, but if you are looking for a wider range then check my supplies shop http://www.modernmetals.etsy.com/.

Treasury!

One of my creations has been selected to be in a treasury!! This is the first treasury that I’ve been in and I am hoping with all my energy that the item makes it to the front page! Here is the treasury: http://www.etsy.com/treasury_list.php?room_id=57373 Big thanks to Denise who created the treasury. She obviously put a lot of time into picking all of the great items in it. I’m very honored to have been chosen. There is a great feeling of “They like me, they REALLY like” me that comes from being in a treasury. Imagine the feeling you get every time you see a new heart for your store. Now, multiply by about 20.



Here's the cute little necklace she picked. As a note to anyone trying to make their way into the treasury she told me that she picked it because of it's color. Take it to heart Etsians: colorful, clear photos, and good lighting of your item in the photo will help you get into a treasury. Etsy is all about eye candy. I've been working on my photo skills for over a year and this really makes me feel like I've finally gotten to a proffessional look.

I’m getting some great responses from the almond ear wire tutorial. I’m going to try to include more in the future. I’m going to focus on creating, selling, and the ins and outs of etsy. I’ve also decided to add a new feature to the blog. I’ll be doing a monthly “Etsian of the Month” post. It will include an interview from the artist behind a carefully selected Etsy store as well as a sampling of their beautiful creations. I’m talking to someone now about the June EofM (Etsian of the Month). She makes beautiful one of a kind jewelry.

Ear Wire Tutorial

Finals are over, I feel like I have my LIFE back!! I love college, love learning and discussing and debating things... but I hate finals. I’ve been working on the tutorial and I finally have something I think is worthy of posting. Please, please, try it out and give me comments. Tell me where it’s not clear! Tell me if I’m losing you somewhere. Most of all ENJOY!


Almond Ear Wire Tutorial:
Step 1: Assemble your tools. Here is what you’ll need.
20 ga wire (I’m using copper here, but you can use sterling silver, gold-fill, pure gold, fine silver, platinum… basically any wire you want!)
Wire cutters
Round nose pliers
Flat pliers
Burr cup (to file end of ear wires smooth)
Ball-peen hammer
Plastic, rubber, or rawhide hammer
Round form (I’m using an old prescription bottle)
Steel hammering plate

Step 2: Cut two lengths of wire the same length. The length should be about the same length as your bottle is in diameter. In this example I used about 2 inches. Depending on how long you want your earring to be you will need to cut the wire longer or shorter. Once both pieces are cut and are the same length use the bottle to shape the wire into a circle. It’s ok if the ends don’t meet up.

Step 3: Using the round nose pliers create a loop at one end of the ear wire. Repeat for the second wire. Leave one end flat and one end looped, don’t put loops everywhere! Look at the pic that is how the ear wire should look.

Step 4: Using flat pliers grip the ear wire towards the middle and bend into a more triangular shape. Repeat for other wire. Make sure that you bend each wire in the same spot.

Step 5: Place the ear wire on the steel hammering plate and hammer thoroughly with the rubber hammer. This is to harden the wire, you will not see any change in the wire but it should become more sturdy. Be sure the shape the ear wire as you hammer, the shapes it’s in while you hammer will be the shape it stays. Repeat for other ear wire.

Step 6: Using the ball-peen hammer slightly flatten the long end of the ear wire. Don’t go overboard! Just a little flat. Watch out for your fingers (and don’t mind my chipped nail polish). This is to help maintain the shape. The hammering helps to sort of “freeze” the wire in place. You can see in the comparison photo that the hammered wire looks flatter on the long end and is better shaped. You can skip this step but you would have a very flimsy form. Repeat this for second wire.

Before and after hammering:

Step 7: Using the burr cup file the ends of the ear wire round and smooth. This step is very important and can’t be skipped! When you cut wire you leave jagged little pieces behind. If you don’t file your finished wires then you will create micro-tears in the flesh of your ear when you put the earring on. This can lead to irritation and doesn’t feel good!

Step 8: Hang some beads on your beautiful new ear wires and enjoy! Make different sizes, make the back wire longer or shorter, and experiment. Share your results!

Tutorial... STILL COMMING!

I haven’t forgotten the tutorial! I’m having a few technical difficulties getting it assembled. Originally I had planned to do a video but I might have to switch to photos and text. I'm also burried in papers, ahhh finals. When I reminisce about my college days I hope I repress this memory.

I’m hoping that it will be up sometime during this week! (Cross your fingers that the electronic gremlins don’t strike twice).

In the mean time if you’d like to get you supplies gathered you’ll need:
Rubber or rawhide hammer
Steel hammering plate (or other hard surface)
A few inches of 20 gauge sterling silver wire.
If you don’t want to go buy a bunch of feet of sterling silver check out http://www.modernmetals.etsy.com/ You can purchase wire by the foot!